FeSiO Engineering
วิศวกรรมศาสตร์สำหรับอนาคตคนรุ่นใหม่
Accessories
Diver-Mate
Description
Straightforward Data Collection with the New Diver-Mate
The Diver-Mate is designed for simple and fast downloading of the data from Diver groundwater data loggers. It increases download efficiency while reducing data transfer errors and connects directly to the DXT-Cable on which the Diver is deployed in a well.
The Diver-Mate stores the data in its internal memory, and it can store data from thousands of Divers. A full battery supports up to 5 days of operational use and a LED indicator shows the battery capacity.
The Diver-Mate becomes a powerful data transfer tool in combination with the Diver-App for Android. The Diver-App allows you to transfer data from the Diver to the Diver-HUB. Alternatively, the data on the Diver-Mate can easily be transferred to Diver-Office using the supplied USB cable.
Features
-
Fits well in the palm of your hand
-
16 GB memory card included
-
Built-in battery, rechargeable through USB-C
-
Equipped with 6 multicolor LEDs
-
Equipped with motion detector
-
Equipped with Bluetooth
-
Works seamlessly with the Diver-App
-
Equipped with a USB-C connector
Benefits
-
Convenient to use at the well site, lower risk of dropping when wearing gloves
-
Sufficient storage space for large monitoring networks
-
Easily rechargeable
-
Status update on all components and functions – Diver, Cable, Memory, Battery, USB, Bluetooth
-
Gives status update when picked up
-
Wireless connection to your smartphone
-
Download Diver data to your smartphone, upload data to an FTP server or send by email, assess well status
Diver USB Reading Unit
Description
The USB Reading Unit connects to a USB port of a PC, laptop and/or tablet. Simply insert the Diver into the base of the USB Reading Unit to connect to it using the free Diver-Office software. Once connected the Diver can be programmed, settings or data read. The conductivity sensor of the CTD-Diver can be calibrated using the USB Reading Unit.
The USB Reading Unit can be used in the field or the office and supports all Divers.
Note: Diver-Office must be installed to be able to communicate with the Diver.
Features
-
Supports all Divers
-
Calibrate the conductivity sensor of the CTD-Diver
Benefits
-
One reading device for all Divers
-
Plug-and-play
Diver Smart Interface Cable
Description
The Diver Smart Interface Cable™ is a communication device that link the Divers to a PC, laptop and/or tablet. Simply plug the Smart Interface Cable in any available USB port on the computer and connect the other end to the communication cable. The deployed Diver can now be accessed using the free Diver-Office software. Once connected, the Diver can be programmed, settings read, or data downloaded.
-
The Smart Interface Cable features a barometric sensor that allows for real-time comparison of Diver readings and manual measurements. After connecting the Smart Interface Cable, the Diver can be returned to its original position in the well with the supplied Suspension Plate.
-
The Smart Interface Cable features indicators that identify if a cable is connected, a Diver is connected to the communication cable, or if the communication cable is malfunctioning.
-
The Smart Interface Cable can be used for communication cables from 1 meter up to 500 meters in length.
-
The Smart Interface Cable is designed for use in the field and supports all Divers.
Note: Diver-Office 2017.2 or later must be installed to communicate to the Diver through the Diver Smart Interface Cable.
Features
-
Real-time atmospheric pressure measurement
-
Informational indicators: ready, sending data, receiving data
-
Warning indicators: Diver not connected/communicating, cable malfunctioning
Benefits
-
Plug-and-play
-
Compare Diver measurements to manual measurements
Diver Copper Shield
Description
The Diver Copper Shield protects the CTD-Diver from bio-fouling and reduces maintenance cost. There are many methods that can be used to prevent and remove the bioaccumulations. However, these methods can be expensive and detrimental to the environment. There is a lesser known natural solution that is a good match for the CTD-Diver and is effective at reducing the development of microorganisms. The Diver Copper Shield is a copper coil shield specifically designed to significantly reduce the growth of algae on the electrodes. Thus reducing the need for maintenance and reducing the time spent on site.
What is bio-fouling?
Bio-fouling is the undesirable accumulation of microorganisms, plants, algae, or animals on wetted structures. This is especially prominent in surface water monitoring in warm environments. Bio-fouling causes an algal growth on the electrodes of the CTD-Diver. This may affect the conductivity readings and increases the need for maintenance. Removing the biological materials from the electrodes can be damaging over a prolonged period of time and increase time spent in the field.
Benefits
-
Lower maintenance intervals
-
Reduced algae growth on the conductivity sensor
-
Improved conductivity readings
-
Easy to install and use
Diver-Link Control Magnet
Description
Use the Diver-Link Control Magnet to activate or read the status of the Diver-Link.
Part No Description
MN401 Diver-Link Control Magnet
(included with each Diver-Link order)
Diver-Link External Antenna
Description
The Diver-Link External Antenna improves the wireless signal and can be connected to the Diver-Link DN4x2 and DN4x2-3. The Diver-Link External Antenna should be used when the Diver-Link is installed inside a metal well casing or in flush mount wells with poor 4G/LTE coverage.
Part No Description
AN401 Diver-Link External Antenna 1m
AN402.5 Diver-Link External Antenna 2.5m
AN405 Diver-Link External Antenna 5m
DDC-DXT Adapter
Description
The DDC-DXT Adaptor is the connection between the Smart Interface Cable and a DDC cable. The Smart Interface Cable screws onto the DDC-DXT Adaptor. Once connected, the Diver deployed on the cable can be read by clicking the DDC -Adaptor onto the top connector of the DDC Cable.
General
-
Length : 97.8mm
-
Diameter : 40 mm
-
Wetted materials : POM
Related Products
Diver-Link Lithium Battery
Description
The Diver-Link is powered by one or two lithium D-cell batteries.
Size D-size
Lithium metal approx. 4.7 g
content
Operating -55 °C to +85 °C
temperature range